Product Comparison
Technical Specifications
Feature
General
Authentication Method
—
Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2), HWTACACS
—
Capacity
—
IPv4 routing table entries: 512, IPv6 routing table entries: 256, VLAN IDs: 4094
—
Compliant Standards
—
IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, ANSI/TIA-1057, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX, IEEE 802.1r
IEEE 802.3, IEEE 802.1x
Device Type
Expansion module
Switch - 12 ports - L3 - smart
Switch - 12 ports - L3 - Managed - stackable
Enclosure Type
—
Rack-mountable 1U
Plug-in module
Encryption Algorithm
—
SSL
—
Features
—
Flow control, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, WRR queuing, IPv6 support, High Availability, full duplex mode, sFlow, STP support, RSTP support, VRRP support, MSTP support, ACL support, QoS, CAR, RADIUS support, DHCP server, MLD snooping, DLDP support, STP Root Guard, IPv4 support, LLDP support, DHCP relay, LACP, Port Security, Smart Link Pass-Through, Energy Efficient Ethernet, dynamic ARP protection, DHCP protection, MVRP, SPQ, port isolation, GARP, OpenFlow support, IP source guard, ICMP IRDP, Link Aggregation, VLAN Double Tagging (Q-in-Q), LLDP-MED, Smart Link, Guest VLAN, Ethernet OAM, proxy ARP, WRR, IRF Technology, BPDU protection, UDP support, MRP
IPv6 support, Zero Configuration Technology, QoS, RRPP, EAD, LACP support, MIB, SNMP support, ISSU, VPLS, SDN, OAM support mechanism, GIR mode, mDNS, Web authentication
Flash Memory
—
256 MB
4 GB (max)
Form Factor
Plug-in module
—
—
Jumbo Frame Support
—
9216 bytes
—
MAC Address Table Size
—
16384 entries
—
Max Units In A Stack
—
—
4
Performance
—
Latency (1000 Mbps): 5 µs, Latency (10 Gbps): 3 µs, Throughput: 18 Mpps, Routing/switching capacity: 128 Gbps
Switching capacity (per slot): 480 Gbps
Ports
—
8 x 10/100/1000 + 2 x 1 Gigabit / 10 Gigabit SFP+ + 2 x combo 10GBase-T
12 x 40 Gigabit Ethernet + 4 x 100 Gigabit QSFP28
RAM
—
512 MB SDRAM
4 GB (max)
Remote Management Protocol
—
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, SSH-2, CLI, SCP, SNMP 6, NTP, ICMP, DHCP, RADIUS
Telnet
Routing Protocol
—
OSPF, RIP-1, RIP-2, IGMP, OSPFv2, IGMPv3, OSPFv3, static IPv4 routing, static IPv6 routing, CIDR
OSPF, IS-IS, BGP, OSPFv3, MPLS
Subtype
—
Gigabit Ethernet
100 Gigabit Ethernet
Power
Power Device
—
Internal power supply
Internal power supply (not installed)
Power Provided
—
10 A
—
Power Redundancy
—
—
Yes
Voltage Required
—
AC 100-240 V (50/60 Hz)
AC 100-240 V
Miscellaneous
Compliant Standards
—
Plug and Play, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, ICES-003 Class A, RoHS, UL 60950-1, IEC 60950-1, WEEE, EN 60825-1, FCC Part 15 B Class A, EN 60825-2, IPv6 Ready, EN 300 386, FDA 21 CFR, AS/NZS CISPR 32 Class A, YD/T993, IEC 62368-1, EN 55032, CAN/CSA-C22.2 No. 60950-1, VCCI-CISPR 32:2016 Class A, ETSI EN 300 386, EN 62368-1:2014/A11:2017, GB/T9254
—
Pricing Type
—
BTO
—
Rack Mounting Kit
—
Included
—
Networking
Connectivity Technology
Wired
—
—
Data Link Protocol
Gigabit Ethernet, 10 Gigabit Ethernet
—
—
Data Transfer Rate
10 Gbps
—
—
Features
MACsec support
—
—
Ports
Gigabit Ethernet / 10 Gigabit SFP+ x 8
—
—
Weight & Dimensions
Depth
—
16 cm
—
Height
—
4.36 cm
—
Weight
—
1.5 kg
—
Width
—
26.6 cm
—
Compatibility Information
Designed For
HPE Aruba 5406R 16-port SFP+ (No PSU) v3 zl2, 5406R 8-port 1/2.5/5/10GBASE-T PoE+ / 8-port SFP+ (No PSU) v3 zl2
—
—
Connections & Expansion
Expansion Slots
—
—
10 (total) / 6 (free) x Expansion Slot
Interfaces
8 x 1Gb Ethernet/10Gb Ethernet - SFP+
8 x 1000Base-T RJ-45, 2 x Gigabit / 10Gbit LAN SFP+, 2 x Gigabit / 10Gbit LAN RJ-45, 1 x console RJ-45 management
12 x 40Gbit LAN, 4 x 100Gbit LAN QSFP28, 1 x USB, 1 x LAN management, 1 x serial (RS-232C), 1 x serial (RS-232C) management, 1 x modem
Environmental Parameters
Humidity Range Operating
—
10 - 90% (non-condensing)
—
Humidity Range Storage
—
5 - 95% (non-condensing)
—
Max Operating Temperature
—
50 °C
—
Max Storage Temperature
—
70 °C
—
Min Operating Temperature
—
-5 °C
—
Min Storage Temperature
—
-40 °C
—
Manufacturer Warranty
Service & Support
—
Limited warranty - lifetime
Limited warranty - lifetime
Software / System Requirements
Software Included
—
—
HPE Intelligent Management Center


