Product Comparison
Technical Specifications
Feature
General
Authentication Method
Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2), HWTACACS
—
—
Capacity
IPv4 routing table entries: 512, IPv6 routing table entries: 256, VLAN IDs: 4094
—
—
Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, ANSI/TIA-1057, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX, IEEE 802.1r
—
IEEE 802.3, IEEE 802.1x
Device Type
Switch - 12 ports - L3 - smart
Expansion module
Switch - 12 ports - L3 - Managed - stackable
Enclosure Type
Rack-mountable 1U
—
Plug-in module
Encryption Algorithm
SSL
—
—
Features
Flow control, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, WRR queuing, IPv6 support, High Availability, full duplex mode, sFlow, STP support, RSTP support, VRRP support, MSTP support, ACL support, QoS, CAR, RADIUS support, DHCP server, MLD snooping, DLDP support, STP Root Guard, IPv4 support, LLDP support, DHCP relay, LACP, Port Security, Smart Link Pass-Through, Energy Efficient Ethernet, dynamic ARP protection, DHCP protection, MVRP, SPQ, port isolation, GARP, OpenFlow support, IP source guard, ICMP IRDP, Link Aggregation, VLAN Double Tagging (Q-in-Q), LLDP-MED, Smart Link, Guest VLAN, Ethernet OAM, proxy ARP, WRR, IRF Technology, BPDU protection, UDP support, MRP
—
IPv6 support, Zero Configuration Technology, QoS, RRPP, EAD, LACP support, MIB, SNMP support, ISSU, VPLS, SDN, OAM support mechanism, GIR mode, mDNS, Web authentication
Flash Memory
256 MB
—
4 GB (max)
Form Factor
—
Plug-in module
—
Jumbo Frame Support
9216 bytes
—
—
MAC Address Table Size
16384 entries
—
—
Max Units In A Stack
—
—
4
Performance
Latency (1000 Mbps): 5 µs, Latency (10 Gbps): 3 µs, Throughput: 18 Mpps, Routing/switching capacity: 128 Gbps
—
Switching capacity (per slot): 480 Gbps
Ports
8 x 10/100/1000 + 2 x 1 Gigabit / 10 Gigabit SFP+ + 2 x combo 10GBase-T
—
12 x 40 Gigabit Ethernet + 4 x 100 Gigabit QSFP28
RAM
512 MB SDRAM
—
4 GB (max)
Remote Management Protocol
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, SSH-2, CLI, SCP, SNMP 6, NTP, ICMP, DHCP, RADIUS
—
Telnet
Routing Protocol
OSPF, RIP-1, RIP-2, IGMP, OSPFv2, IGMPv3, OSPFv3, static IPv4 routing, static IPv6 routing, CIDR
—
OSPF, IS-IS, BGP, OSPFv3, MPLS
Subtype
Gigabit Ethernet
—
100 Gigabit Ethernet
Power
Power Device
Internal power supply
—
Internal power supply (not installed)
Power Provided
10 A
—
—
Power Redundancy
—
—
Yes
Voltage Required
AC 100-240 V (50/60 Hz)
—
AC 100-240 V
Miscellaneous
Compliant Standards
Plug and Play, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, ICES-003 Class A, RoHS, UL 60950-1, IEC 60950-1, WEEE, EN 60825-1, FCC Part 15 B Class A, EN 60825-2, IPv6 Ready, EN 300 386, FDA 21 CFR, AS/NZS CISPR 32 Class A, YD/T993, IEC 62368-1, EN 55032, CAN/CSA-C22.2 No. 60950-1, VCCI-CISPR 32:2016 Class A, ETSI EN 300 386, EN 62368-1:2014/A11:2017, GB/T9254
—
—
Pricing Type
BTO
—
—
Rack Mounting Kit
Included
—
—
Networking
Connectivity Technology
—
Wired
—
Data Link Protocol
—
Gigabit Ethernet, 10 Gigabit Ethernet
—
Data Transfer Rate
—
10 Gbps
—
Features
—
MACsec support
—
Ports
—
Gigabit Ethernet / 10 Gigabit SFP+ x 8
—
Weight & Dimensions
Depth
16 cm
—
—
Height
4.36 cm
—
—
Weight
1.5 kg
—
—
Width
26.6 cm
—
—
Compatibility Information
Designed For
—
HPE Aruba 5406R 16-port SFP+ (No PSU) v3 zl2, 5406R 8-port 1/2.5/5/10GBASE-T PoE+ / 8-port SFP+ (No PSU) v3 zl2
—
Connections & Expansion
Expansion Slots
—
—
10 (total) / 6 (free) x Expansion Slot
Interfaces
8 x 1000Base-T RJ-45, 2 x Gigabit / 10Gbit LAN SFP+, 2 x Gigabit / 10Gbit LAN RJ-45, 1 x console RJ-45 management
8 x 1Gb Ethernet/10Gb Ethernet - SFP+
12 x 40Gbit LAN, 4 x 100Gbit LAN QSFP28, 1 x USB, 1 x LAN management, 1 x serial (RS-232C), 1 x serial (RS-232C) management, 1 x modem
Environmental Parameters
Humidity Range Operating
10 - 90% (non-condensing)
—
—
Humidity Range Storage
5 - 95% (non-condensing)
—
—
Max Operating Temperature
50 °C
—
—
Max Storage Temperature
70 °C
—
—
Min Operating Temperature
-5 °C
—
—
Min Storage Temperature
-40 °C
—
—
Manufacturer Warranty
Service & Support
Limited warranty - lifetime
—
Limited warranty - lifetime
Software / System Requirements
Software Included
—
—
HPE Intelligent Management Center


